The Vent-Flat Roof Terminal Extra Aqua Breather Vent and Cap is intended for roofing systems designed to use a breather outlet to help manage trapped moisture. It has a separate protective cap and formed base, so its waterproofing interface and location must be planned into the roof system rather than treated as a simple after-fit air vent.
Extra Aqua breather terminal for designed flat-roof ventilation
The existing listing describes a polypropylene body with grey base and white dome, approximately 197mm high, 267mm base diameter and 184mm opening. It also refers to an indicative coverage of up to 36m² per vent. That figure must be confirmed against the manufacturer's guidance and overall roof design before calculating the required number of units.
Sizes and available variants
-
Product: Vent-Flat Roof Terminal Extra Aqua Breather Vent And Cap
Choosing the right version
Determine whether the existing roof has a correctly specified vapour barrier, ventilation strategy and sound insulation/deck materials. Moisture within old flat-roof layers can have several causes. A vent may form part of a remedial system, but it will not by itself fix leaks, rotten decking or a failed waterproofing membrane.
Installation and practical project advice
Any roof penetration requires a compatible waterproofing detail at the terminal base. Select a location that will not interfere with roof outlets, walkways or falls. Follow the manufacturer's current instructions for the cap, membrane interface and fixings, and use safe roof-access arrangements.
Related products and buying guidance
Compare flat roof ventilation terminals and browse roof ventilation products for other materials in the same project. You can also find flat roof outlets, together with flat roofing systems for more ideas and buying advice.
Frequently asked questions
What is an Extra Aqua breather vent?
A terminal intended to provide a designed ventilation or vapour escape point in suitable flat-roof systems.
What is the listed height?
Approximately 197mm.
What is the approximate base diameter?
267mm in the existing product information.
Can I fit one for every 36m²?
Only if that approach is supported by the manufacturer's and roofing designer's requirements.
Will it repair a leaking flat roof?
No. Leaks and defective materials require assessment and appropriate waterproofing repair.