The FloPlast Black 5m Unvented Single Round Edge Soffit Board is designed to finish the underside of a suitable roof overhang. Its black uPVC surface gives the eaves a clean, consistent appearance and reduces the need for routine painting compared with traditional bare timber soffits.
Black unvented uPVC soffit board for roofline finishing
The title identifies a 5m board length, while the live width options are 100, 150, 175, 200, 225, 250, 304 and 404mm. The old description also referred to white colour options, but this particular listing is for Black. It is unvented, which is an important distinction from a vented soffit board.
Product sizes and available options
-
Item: Floplast Black 5m Soffit Board Unvented Single Round Edge
-
Width: 150mm, 175mm, 225mm, 250mm, 304mm, 404mm, 100mm, 200mm
Choosing the right materials
Measure the soffit depth at several points along the roofline and allow for support and any trims. Choose the correct board width and work out the number of 5m lengths needed, including joints and cuts. Check the roof's required ventilation strategy before buying an unvented board: ventilation may need to be provided elsewhere within the approved roof detail.
Installation and maintenance advice
Install with suitable support, fixings and finishing trims following FloPlast's current spacing and movement requirements. Allow for uPVC thermal expansion and do not block required roof ventilation paths. When renewing an old soffit, examine the rafters and roofline timber and repair any decay or water ingress before covering it.
Related products and buying information
Explore uPVC soffit boards for related materials. For the rest of the project, compare fascia boards and choose suitable fascia, soffits and guttering. Further options and practical information are available through roofline ventilation products.
Frequently asked questions
How long is this FloPlast soffit board?
The current listing specifies 5m.
Is it vented?
No. This is an unvented soffit board.
What colour is the product?
Black.
Which widths are offered?
100, 150, 175, 200, 225, 250, 304 and 404mm.
Does unvented mean my roof needs no ventilation?
No. The roof's ventilation requirements must be assessed separately.