Shower Enclosure Sizes: 760mm, 800mm, 900mm & 1200mm
How to measure and compare shower enclosure sizes, quadrant and offset layouts, tray compatibility and door clearance in UK bathrooms.
Choosing the correct shower enclosure size involves more than measuring a spare corner of the bathroom. The tray shape, wall adjustment, door opening, room height and available movement space all matter. This UK buying guide compares 760mm, 800mm, 900mm and 1000mm shower enclosures with larger 1200 x 900mm offset quadrants and explains the practical measurements to check before ordering.
Compare current shower enclosure sizes and styles.
Shop Shower Enclosures →
Why shower enclosure measurements can be confusing
A shower enclosure is sold with a nominal width, but its published adjustment range and overall installed dimensions may differ. An 800mm quadrant, for example, should not be assumed to measure exactly 800mm from every visible outer edge after fitting. Frame profiles and wall adjustment can change how the enclosure meets the shower tray. Read the actual manufacturer's measurements before choosing a size.
The Hudson Reed Apex 800mm quadrant enclosure shows a compact corner arrangement. Its installation must suit the tray's shape and the wall positions, not merely an approximate tape-measure reading. If you are replacing an older shower, first identify the existing tray's precise dimensions and whether its corner profile is compatible with the new enclosure.
How to measure the available floor space
Start by recording the clear width and depth of the proposed shower area after any wall tiling or finishes. Mark out the intended tray footprint on the floor and check the distance to the toilet, basin, heated towel rail and doorway. A shower can fit physically in the corner yet leave an uncomfortable walkway or no room for the enclosure door to open.
Measure at more than one height because older walls can be out of square. If the bathroom has a sloped ceiling, bulkhead or low window, also check the enclosure's total height and the room's available headroom. A nominal measurement is a useful starting point but should never replace the manufacturer's technical drawing.
760mm and 800mm enclosures for compact bathrooms
Smaller shower spaces often use 760mm or 800mm dimensions, but the right size is determined by comfort as well as clearance. A compact enclosure can be useful in an en-suite or narrow bathroom, although a showering area that is too small may feel restrictive. Check the door opening and whether you can reach the shower controls without stepping awkwardly around the frame.
For rectangular or hinged arrangements, the 760mm Apex shower side panel and 800mm Apex side panel are examples of companion components. A side panel normally needs a compatible shower door and tray arrangement, so it should not be ordered as a complete enclosure on its own unless the product specifically states that it is a complete unit.
900mm shower enclosures: a versatile middle size
A 900mm shower enclosure is popular where a room has enough space for a more comfortable washing area without committing to a very wide rectangular tray. It can work as a quadrant in a corner or as part of a square enclosure, depending on the product range. Door opening clearance and where the waste sits can still influence which arrangement suits the room.
The 1000mm Apex quadrant enclosure gives a larger point of comparison, while the 900mm Apex side panel demonstrates how a panel can form one side of a two-part enclosure. Compare exact tray compatibility, mounting position and adjustments rather than assuming products from different enclosure families can be mixed.
1000mm and larger shower enclosures
Where space permits, a larger shower can be more comfortable for a busy household. A 1000mm quadrant makes a different use of the corner than a wide rectangular enclosure, and the entrance position matters as much as the floor footprint. If two people need to use the bathroom around busy mornings, the larger shower should still leave sensible circulation space outside it.
A Hudson Reed 1000mm quadrant shower enclosure is one option to compare with smaller corner designs. Think about the tray shape, screen height and door position before deciding. A larger enclosure is not always more practical if it creates a narrow pinch point beside the toilet or obstructs drawers under a nearby vanity unit.
Check quadrant, side-panel and offset enclosure options.
Shop Shower Enclosures →
Offset quadrant sizes such as 1000 x 800mm
An offset quadrant has two different nominal side lengths, allowing more room along one direction while retaining the curved corner footprint. This can be helpful when the bathroom has more space along one wall than the other. It's especially important to confirm which side of the enclosure is longer and whether the model's handedness or door arrangement matters.
For example, the Hudson Reed Apex 1000 x 800mm offset quadrant provides a useful alternative to a regular square-based quadrant. Check the actual installation footprint and the matching tray carefully. Turning an offset enclosure through ninety degrees may not be possible for every design, so look at the technical drawing for the version you're buying.
1200 x 900mm offset quadrants and spacious layouts
A 1200 x 900mm offset quadrant provides a more generous floor area, which can feel useful if you prefer not to stand very close to the shower glass. It also takes more room outside the enclosure, so the surrounding bathroom still needs comfortable access. In a larger main bathroom, this type can be worth comparing with rectangular enclosures and walk-in screens.
The Hudson Reed Apex 1200 x 900mm offset quadrant enclosure demonstrates this category. Read both actual side measurements and any tray requirements. The apparent curve in a product photograph is not enough to confirm compatibility with a tray from another manufacturer.
Quadrant, square and rectangular footprints
A quadrant enclosure uses a curved outside corner and can reduce the space occupied near a door or walkway. A square enclosure has a more angular shape, while a rectangular format may offer additional shoulder or standing room along one axis. None is automatically the best: think about the position of the shower controls and whether the door opens into the room.
For a bathroom with a difficult layout, draw the proposed footprint and include the door sweep. A hinge door needs unobstructed opening room, while sliding and bi-fold doors can help where outward swing space is tight. See our shower doors collection for relevant formats to compare with your preferred tray layout.
Don't overlook enclosure height and access
Shower enclosure height varies by range and should be checked against the room rather than assumed. A taller screen can help contain spray, but you still need access for fitting, cleaning and ventilation. Sloping ceilings, window reveals and shower fittings may limit the usable height or create clashes with a door or return panel.
Think about who uses the shower. An enclosure with a narrow entry may be less practical for someone who needs greater access even when its overall footprint is generous. The stated door entry width can be more relevant than the tray size in some households. Check the specification rather than judging door clearance from a studio photo.

Fit the tray and the enclosure as a system
The tray, door and panels should be planned together. A quadrant enclosure may require a matching curved tray profile; an offset design often needs a more specific tray. Read the manufacturer's adjustment ranges and confirm whether the frame can accommodate the finished tiled walls. Do not assume a separate side panel from another range will fit simply because its nominal width matches.
Before placing an order, make sure the waste position works with the room's drainage and that the tray can be installed with suitable support. A competent bathroom fitter can assess walls that are out of plumb, existing waterproofing and the fixing method. It is generally easier to solve those issues before fitting the glass.
Measuring checklist before purchase
Record the finished tray or shower area dimensions, wall straightness, available height, door opening clearance, likely entry width and the position of nearby fittings. Identify the enclosure's intended tray profile, glass thickness and frame finish. Check whether the listing includes the door, side panel, fixings and any adjustment profiles you expect.
Browse our shower enclosures and panels range with the dimensions beside you. If you're considering a different open-plan arrangement, our wetroom screens collection can offer an alternative design, but it also requires suitable drainage and waterproofing. A carefully measured enclosure will usually be easier to fit and more comfortable to use.
Shower Enclosure Size FAQs
What size shower enclosure is best for a small bathroom?
Compact 760mm or 800mm models may fit, but comfort, opening width and door clearance still matter.
Is a 900mm quadrant shower big enough?
It can suit many bathrooms, although your preferred movement space and the actual internal dimensions should guide the choice.
What is an offset quadrant?
An enclosure with two unequal nominal sides and a curved corner footprint.
Are all 1200 x 900mm enclosures interchangeable?
No. Actual adjustments, tray profile and fixing systems vary by model.
Does a shower enclosure include the tray?
Not always. Check the package contents and tray compatibility before ordering.
Can I install a shower enclosure on uneven walls?
The manufacturer may provide an adjustment range, but wall condition and waterproofing need assessment by the installer.
Find a shower enclosure that fits your bathroom.
Shop Shower Enclosures →