How to Measure & Fit a Shower Enclosure and Side Panels

Plan your shower enclosure installation with accurate measurements, suitable trays, compatible side panels and access clearance.


By JJ Building Materials
6 min read

How to Measure & Fit a Shower Enclosure and Side Panels - JJ Building Materials

Fitting a new shower enclosure successfully begins before the first wall profile is fixed. The tray, finished wall dimensions, door clearance, enclosure adjustment and waterproofing all need to work together. This practical guide explains the key checks for corner enclosures, quadrant showers, hinged and bi-fold doors and fixed side panels in UK bathrooms.

Browse compatible shower enclosure and panel options.

Shop Shower Enclosures →
Hudson Reed Apex 900mm Side Panel Contemp Chrome Aluminium 1900x890x31mm - JJ Building Materials
See this product

Plan the shower as one installation

An enclosure can only perform well when the tray, waterproofed walls, glass and plumbing are planned together. Start by deciding exactly where the shower will sit and how users will approach its entrance. Mark out the intended footprint on the bathroom floor and check the opening against nearby toilets, vanity drawers and towel rails. A room can accommodate a shower tray but still leave too little space to get into it comfortably.

Review the specification of the complete enclosure before buying separate parts. A Hudson Reed 900mm quadrant shower enclosure needs a compatible curved tray and appropriate wall positions. A 1000 x 800mm offset quadrant enclosure occupies a different footprint and may have orientation requirements. Consider the room's available width and depth rather than relying only on the nominal size in the title.

Measure the finished wall opening

Take dimensions after allowing for wall tiling or panels, ideally once the finished surfaces are in place. Measure at the top, middle and bottom of the proposed enclosure. In older houses, walls can lean or be slightly out of square, so a single measurement may not represent the whole opening. Compare the recorded values with the manufacturer's installation and adjustment range.

Don't expect the nominal size to equal the complete outside dimension. Door frames, profiles and the tray position influence the fitting. Keep clear records of where the tray meets the wall and whether the fixing points will encounter a stud, masonry or another material. Ask an installer to assess any unusual walls before ordering a glass panel.

Choose between a complete enclosure and separate panels

Some shower listings describe a complete unit, while others are for a single side panel or door. A side panel is typically a fixed glass component intended to work with a matching door from the same range. If the shower is fitted into a recess with three finished walls, a door alone may be appropriate; if it sits in a corner, a door and side panel often complete the layout.

The Hudson Reed Apex 900mm shower side panel and Nuie Rene 900mm fixed side panel are examples of separate components rather than universal accessories. Check the compatible door series, glass specification and frame profile. A pair of panels that share the same width label may use different connecting details.

Tray and enclosure compatibility

The shape of the shower tray determines the outline that the enclosure must follow. Quadrant trays can use different curves, while offset trays have unequal side dimensions and may have particular installation orientations. A square or rectangular tray is not necessarily compatible with a quadrant door, even if the dimensions look similar from above.

Before fitting the tray, confirm the manufacturer's intended pairing and where the enclosure's vertical frame will sit relative to the raised edge. The tray needs suitable support, drainage and a reliable connection to the surrounding waterproofing. A tray that flexes or moves may place stress on the glass seals over time.

Check the wall adjustment range

Many framed enclosures include limited wall adjustment to accommodate minor variations in the actual finished opening. This can be useful where tile thickness or wall position differs slightly from a nominal measurement. Adjustment is not unlimited, however, and its usable range depends on the specific product and how the panels meet the tray.

Some ranges list optional extension profiles, including the Hudson Reed chrome enclosure extension profile. These aren't generic solutions for every brand or model. Verify the approved compatibility and total finished adjustment before adding one, and never assume you can use several unrelated profiles to compensate for an incorrectly sized enclosure.

Check sizes and compatible shower components.

Shop Shower Enclosures →
Hudson Reed Apex 1000 X 800mm Offset Quadrant Contemp Chrome Aluminium,metal 1900x980x780mm - M1080Q-E8 - JJ Building Materials
See this product

Door swing and entry clearance

A hinged shower door may extend well into the room when opened, whereas a sliding or bi-fold format operates differently. Check the actual door sweep against nearby fittings and measure the usable entry width. A nominally wider door doesn't always provide a larger clear entrance once the glass, handles and opening mechanism are taken into account.

For example, compare a Nuie Rene 900mm hinged shower door with a Nuie Rene 800mm bi-fold shower door. The correct choice depends on your bathroom layout and how you prefer to get into the shower. An installer can advise if a left- or right-opening option is required.

Enclosure height and ceiling clearance

The complete enclosure height needs to fit beneath the bathroom ceiling and clear any nearby window reveal, sloping roof or decorative feature. A taller shower screen can change how the room looks and may help contain spray, but it should never obstruct ventilation or make maintenance access awkward.

Measure available height at the actual fixing line rather than elsewhere in the room. Consider whether a showerhead, overhead drench fitting or wall-mounted controls could interfere with the glass. Confirm the manufacturer's glass and frame dimensions instead of inferring them from the product photograph.

Waterproofing before the glass goes up

The tray and surrounding wall surfaces need suitable waterproofing for the intended shower configuration. Wall tiles and grout alone shouldn't be treated as a substitute for the complete water-management system. The installer should follow the correct method for sealing the tray-to-wall junction and any specified enclosure connections.

When replacing a leaking enclosure, look for the original source rather than assuming new glass will solve every water problem. Damaged grout, defective seals, poor tray installation or unsuitable wall waterproofing can all allow moisture into areas behind the shower. Investigate and repair those issues before installing new panels.

Fit panels securely and avoid stressing the glass

Shower safety glass and frame components must be handled according to their installation instructions. Supporting profiles should be fixed to suitable underlying wall structure. An unstable wall or incorrect fixing arrangement can compromise the installation even when the glass itself is the correct size.

Avoid trying to cut, drill or force the glass into an opening that is outside the stated adjustment range. If an existing enclosure is damaged, use appropriate replacement parts rather than improvising with unrelated components. Correct alignment makes doors easier to operate and helps the seals perform as intended.

Check seals, drainage and door operation

After the enclosure is assembled, check that the door moves smoothly without catching on the tray or adjoining glass. Seals should sit where the manufacturer specifies and water should return to the tray rather than escaping onto the bathroom floor. Some frame channels are intended to drain in particular directions and should not be blocked with unnecessary sealant.

Test the shower carefully before treating the installation as complete. Inspect the wall connections, frame junctions and tray edges for drips, especially where water can reach the door. Don't assume that water visible outside the enclosure always originates from the glass; the shower controls and plumbing can also leak.

Nuie Rene 1900 X 900mm Hinged Shower Door Contemporary Chrome Aluminium 1900x890x44mm - JJ Building Materials
See this product

Maintenance and cleaning access

An enclosure used every day will collect soap residue and limescale, particularly around lower tracks, hinges and seals. Choose a configuration where those areas can be reached without dismantling the whole shower. Some doors have serviceable rollers or detachable features, but the details depend on the range.

Follow the manufacturer's cleaning advice for the glass treatment and metal finish. Avoid abrasive tools that may scratch decorative coatings. Good ventilation helps the enclosure dry between uses and can reduce prolonged condensation on nearby bathroom walls and furniture.

Your installation-ready checklist

Before placing an order, confirm the exact tray size and shape, wall measurements at several heights, enclosure adjustment range, overall height, entry width and chosen door operation. Identify every required component, including any separate fixed panels and approved adjustment profiles.

Browse shower enclosures and panels to compare actual specifications. For a more open layout, wetroom screens can be another option, but drainage and waterproofing requirements differ. Ask your bathroom installer about any uncertain wall construction or tray compatibility before purchasing.

Frequently Asked Questions

Can I fit a shower enclosure on a different manufacturer's tray?

Only when the tray and enclosure are confirmed compatible in shape, dimensions and installation requirements.

What if my walls aren't perfectly straight?

Some products provide limited adjustment. Check the stated range and have significant variations assessed.

Does a shower side panel include a door?

Not generally. Check the actual package and compatible door range.

Do I need to waterproof behind shower tiles?

Use an appropriate waterproofing system for the shower layout as specified by the relevant installation guidance.

Can I cut shower safety glass to size?

Do not attempt to alter manufactured shower glass. Select compatible dimensions and use the intended fixing method.

How can I prevent a shower enclosure from leaking?

Correct tray installation, waterproofing, enclosure alignment and manufacturer-specified seals all matter.

Choose an enclosure with the right size and fitting details.

Shop Shower Enclosures →