Mira Minilite EV Mixer Shower

Mira Minilite EV Mixer Shower

The Mira Minilite EV Mixer Shower is a compact, practical choice for bathrooms where space is at a premium. Its slim design makes it particularly well suited to en-suite bathrooms, while the straightforward single-control operation makes it easy to adjust both the water flow and temperature for a comfortable shower every time.

Powerful Performance, Even at Low Pressure

Featuring Mira Magni-flo™ technology, the Minilite EV is designed to deliver up to three times more flow, even where water pressure is low. It works across a wide range of water systems and pressures, making it a versatile option for different household installations. The large 90mm showerhead provides a more enjoyable showering experience, while the rub-clean nozzles make it simple to remove limescale and keep the showerhead performing at its best.

Simple and Precise Temperature Control

The Mira Minilite EV uses thermostatic temperature control, helping maintain a consistent and comfortable shower temperature. The thermostatic shutdown operates within two seconds, providing an added level of protection should the water supply conditions change. The maximum temperature can also be adjusted to suit the conditions on site. It is factory set at 41°C, but this can be altered by the installer where required.

Flexible Installation

The shower is designed to accommodate rising, falling or rear water entry, with ½” BSP or 15mm male compression inlet connections and a ½” BSP male flat-face outlet connection. Reversed inlets are also supported, making the Minilite EV a useful replacement option for a range of existing installations. The adjustable elbow pack is no longer compatible with this model. If your existing pipe centres are wider than 153mm, Mira recommends the Mira Miniduo as an alternative.

Key Benefits for Your Customer

With one simple control for switching the shower on and off and adjusting the temperature, the Mira Minilite EV is easy to use and maintain. Its four-spray showerhead gives customers a choice of showering experiences, while the large, long-life filters and replaceable cartridge help make ongoing maintenance straightforward. The shower is WRAS Approved and Buildcert TMV2 Approved, providing reassurance around quality and temperature safety. It can also be fitted quickly and easily to reversed inlet supplies, helping simplify installation in suitable bathrooms.

Water and Pressure Requirements

The Mira Minilite EV is suitable for cold water temperatures of up to 25°C and hot water temperatures between 60°C and 65°C. It has a minimum maintained pressure requirement of 0.1 bar, equivalent to a 1-metre head, and a maximum maintained pressure of 5.0 bar, equivalent to a 50-metre head. The maximum static pressure is 10.0 bar, or a 100-metre head. These operating ranges make the shower suitable for a variety of domestic water systems, including installations where water pressure may be relatively low.

Installation and Maintenance

Designed with ease of installation and maintenance in mind, the Mira Minilite EV includes large, long-life filters and a replaceable cartridge. Its support for reversed inlet supplies can also make fitting a replacement shower more convenient. For a visual guide to installation, you can watch the step-by-step installation video here: ?{"fallbackMarkdown":"Mira Minilite EV Mixer Shower Installation Video","reference":{"matched_text":"","prefix":null,"start_idx":3662,"end_idx":3760,"safe_urls":[],"refs":[],"alt":"Mira Minilite EV Mixer Shower Installation Video","prompt_text":"Mira Minilite EV Mixer Shower Installation Video","type":"url","layout":null,"item":{"title":"Mira Minilite EV Mixer Shower Installation Video","url":"https://www.youtube.com/watch?v=EA8EIBU-ZDM&utm_source=chatgpt.com","attribution":"youtube.com","pub_date":null,"snippet":null,"attribution_segments":null,"supporting_websites":null,"refs":[],"hue":null,"attributions":null},"logo":null,"title":"Mira Minilite EV Mixer Shower Installation Video"},"showLoginRequiredCard":false}?

Technical Specifications

Control type: Thermostatic Thermostatic shutdown: Within 2 seconds Factory-set maximum temperature: 41°C Cold water range: Up to 25°C Hot water range: 60°C–65°C Minimum maintained pressure: 0.1 bar (1 metre head) Maximum maintained pressure: 5.0 bar (50 metre head) Maximum static pressure: 10.0 bar (100 metre head) Water entry points: Rising, falling or rear Inlet connections: ½” BSP or 15mm Male Compression Outlet connection: ½” BSP Male Flat Face Reversed inlets: Supported Showerhead: 90mm, four-spray Approvals: WRAS Approved and Buildcert TMV2 Approved Filters: Large, long-life filters Cartridge: Replaceable

Frequently Asked Questions

Is the Mira Minilite EV suitable for low water pressure?

Yes. The Mira Minilite EV is designed to work across different water systems and pressures, including low-pressure installations. Mira Magni-flo™ technology can provide up to three times more flow, even when water pressure is low. The minimum maintained pressure is 0.1 bar (1 metre head).

What temperature is the Mira Minilite EV set to?

The shower is factory set to a maximum temperature of 41°C. The maximum temperature can be adjusted by the installer to suit the conditions of the installation.

Can the Mira Minilite EV be installed with reversed water inlets?

Yes. The Mira Minilite EV supports reversed inlet supplies, which can make it suitable for certain replacement installations. However, the adjustable elbow pack is no longer compatible with this model. If the existing pipe centres are larger than 153mm, the Mira Miniduo is recommended as an alternative.

At JJ Building Materials, we're committed to supplying quality building products at competitive prices, backed by the service and expertise you'd expect from an established independent merchant. Whether you're a trade professional managing large-scale projects or a homeowner taking on a DIY renovation, we're here to help you find the right products for the job.

As part of the JJ Roofing Supplies Group, we build on decades of experience supplying construction materials across the UK. We've expanded beyond roofing to offer a growing range of building materials, including timber, insulation, landscaping products, plumbing supplies, flooring, doors, bricks, fencing, garden buildings and much more – all available to order online with nationwide delivery.

We work with many of the industry's leading manufacturers to bring you trusted products that meet the highest standards of quality and performance. Our team is passionate about providing excellent customer service, competitive pricing and a straightforward shopping experience from start to finish.

When you shop with JJ Building Materials, you can expect:

• Competitive prices on leading brands and quality products.
• Nationwide delivery across the UK
  
• A constantly expanding range of building and landscaping materials.
  
• Friendly, knowledgeable customer support.
  
• A trusted business backed by the JJ Roofing Supplies Group.
  

Every order is personally reviewed by our experienced team to ensure everything is correct before dispatch. We offer delivery from as little as the next working day on selected products, so please refer to the dark blue Estimated Delivery box above for the expected delivery timeframe for this item.

We work with trusted manufacturers and specialist delivery partners to ensure your order arrives safely and on time. You'll receive tracking details once your order has been dispatched, and if we need to confirm any delivery details, one of our team will contact you directly to keep everything running smoothly.

Roof Tiles & Fittings:

We recommend ordering an additional 10% of roof tiles to allow for any breakages that may occur during delivery or handling. Roof tiles are naturally fragile, and having a few extra on site helps prevent delays and ensures your roofing project can be completed without interruption.

Multiple Products from the Same Supplier

If you're ordering multiple products from the same supplier, your order will be dispatched together once all items are ready. This means the longest lead time will apply.

If you need part of your order sooner, please call us on 01202 113233. We can arrange a split delivery, although an additional shipping charge will apply.