{"product_id":"mira-event-xs-thermostatic-fittings-white-chrome-power-shower","title":"Mira Event XS Thermostatic + Fittings White\/Chrome Power Shower","description":"\u003ch3\u003eMira Event XS Thermostatic + Fittings White\/Chrome Power Shower\u003c\/h3\u003e\n\nThe Mira Event XS Thermostatic Power Shower combines powerful performance with practical features to provide a comfortable and safer showering experience. Designed for homes with low water pressure and a plentiful supply of hot water, it uses an integrated pump to deliver a strong flow, making it a great choice where conventional shower systems may struggle.\n\n\u003ch3\u003eThermostatic Temperature Control\u003c\/h3\u003e\n\nFor added safety and comfort, the Mira Event XS features thermostatic temperature control to help maintain a more consistent shower temperature. The unit is factory set to a safe maximum temperature, while the phased shutdown function helps flush hot water from the system after use, providing added reassurance for the next shower.\n\nSeparate temperature and flow controls allow you to fine-tune the shower to your preferred settings. A convenient start\/stop button also makes it easy to pause and restart the shower without needing to reset your chosen controls.\n\n\u003ch3\u003ePowerful Low Pressure Performance\u003c\/h3\u003e\n\nThe Mira Event XS is designed for low-pressure water systems and can deliver a flow rate of up to 16 litres per minute. It requires a minimum maintained pressure of just 0.008 bar (80mm head), while the maximum maintained pressure is 0.5 bar (5 metre head). The maximum static pressure is 1.0 bar (10 metre head).\n\nThe shower is suitable for hot water supplies between 55°C and 65°C, with a cold-water temperature range of up to 25°C. With temperature stability of +6°C, it is designed to provide a comfortable and reliable showering experience.\n\n\u003ch3\u003eFour-Spray Showerhead\u003c\/h3\u003e\n\nThe large 11cm four-spray showerhead gives you a choice of spray patterns, helping you customise your shower. The rub-clean nozzles make removing limescale and everyday build-up simple, helping the showerhead stay clean and perform effectively.\n\n\u003ch3\u003eEasy Installation and Maintenance\u003c\/h3\u003e\n\nThe Mira Event XS has been designed with straightforward installation and servicing in mind. There is no need to prime the unit, while the removable filters and check valves make routine maintenance easier.\n\nWater and cable entry points are located on the left and can accommodate rising, falling or rear entry configurations. The shower uses a 15mm dual-entry push-fit inlet connection and 1\/2\" BSP male outlet connections.\n\nIt operates from a 230V supply with a ±10% tolerance and has a 3 amp supply rating. The terminal block accepts connections up to 2.5mm², while a minimum cistern capacity of 230 litres is required.\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cul\u003e \u003cli\u003ePowerful power shower designed for low-pressure water systems\u003c\/li\u003e \u003cli\u003eThermostatic temperature control for safer showering\u003c\/li\u003e \u003cli\u003eSeparate temperature and flow controls\u003c\/li\u003e \u003cli\u003eConvenient start\/stop button\u003c\/li\u003e \u003cli\u003ePhased shutdown function\u003c\/li\u003e \u003cli\u003eFactory-set safe maximum temperature\u003c\/li\u003e \u003cli\u003eFlow rate of up to 16 litres per minute\u003c\/li\u003e \u003cli\u003eTemperature stability of +6°C\u003c\/li\u003e \u003cli\u003eLarge 11cm four-spray showerhead\u003c\/li\u003e \u003cli\u003eRub-clean nozzles for easier cleaning\u003c\/li\u003e \u003cli\u003eSuitable for homes with a plentiful supply of hot water\u003c\/li\u003e \u003cli\u003eNo need to prime during installation\u003c\/li\u003e \u003cli\u003eRemovable filters and check valves for easier servicing\u003c\/li\u003e \u003cli\u003e15mm dual-entry push-fit inlet connection\u003c\/li\u003e \u003cli\u003e1\/2\" BSP male outlet connections\u003c\/li\u003e \u003cli\u003eMinimum maintained pressure: 0.008 bar (80mm head)\u003c\/li\u003e \u003cli\u003eMaximum maintained pressure: 0.5 bar (5 metre head)\u003c\/li\u003e \u003cli\u003eMaximum static pressure: 1.0 bar (10 metre head)\u003c\/li\u003e \u003cli\u003eMinimum cistern capacity: 230 litres\u003c\/li\u003e \u003cli\u003e230V supply with ±10% tolerance\u003c\/li\u003e \u003cli\u003e3 amp supply rating\u003c\/li\u003e \u003cli\u003eTerminal block connections up to 2.5mm²\u003c\/li\u003e \u003cli\u003eWhite\/chrome finish\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003ch4\u003eIs the Mira Event XS Thermostatic suitable for low water pressure?\u003c\/h4\u003e\n\nYes. The Mira Event XS is designed specifically for low-pressure water systems and can operate with a minimum maintained pressure of 0.008 bar (80mm head). Its integrated pump helps provide a powerful flow of up to 16 litres per minute.\n\n\u003ch4\u003eWhat type of temperature control does the Mira Event XS have?\u003c\/h4\u003e\n\nThe Mira Event XS uses thermostatic temperature control to help maintain a more consistent shower temperature. It is also factory set to a safe maximum temperature and includes a phased shutdown function for added safety.\n\n\u003ch4\u003eHow easy is the Mira Event XS to maintain?\u003c\/h4\u003e\n\nThe shower is designed for straightforward maintenance. It does not need to be primed, and both the filters and check valves are removable for easier servicing. The four-spray showerhead also has rub-clean nozzles to make removing limescale easier.","brand":"Mira","offers":[{"title":"Default Title","offer_id":55209867477334,"sku":"181360","price":459.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0905\/4509\/4998\/files\/mira-event-xs-thermostatic-fittings-whitechrome-power-shower-6232292.jpg?v=1788683661","url":"https:\/\/jjbuildingmaterials.co.uk\/products\/mira-event-xs-thermostatic-fittings-white-chrome-power-shower","provider":"JJ Building Materials","version":"1.0","type":"link"}