{"product_id":"mira-event-xs-manual-fittings-white-chrome-power-shower","title":"Mira Event XS Manual + Fittings White\/Chrome Power Shower","description":"\u003ch3\u003eMira Event XS Manual + Fittings White\/Chrome Power Shower\u003c\/h3\u003e\n\nThe Mira Event XS Manual Power Shower is designed to deliver a powerful and refreshing shower experience, even in homes with low water pressure. Its integrated pump helps provide a strong flow of water, making it a practical choice for properties where the existing water pressure may be limited. The shower is available in a choice of white or white\/chrome finishes, allowing you to select the style that best suits your bathroom.\n\n\u003ch3\u003eEasy Temperature and Flow Control\u003c\/h3\u003e\n\nWith separate manual controls for water flow and temperature, the Mira Event XS makes it easy to fine-tune your shower to your preferred settings. The unit is factory set to a safe maximum temperature, with a maximum temperature stop providing additional protection during use. Automatic shutdown also helps improve safety and peace of mind.\n\nThe shower is designed for homes with a plentiful supply of hot water and can operate with a cold-water temperature of up to 25°C and a hot-water temperature between 55°C and 65°C. It requires a minimum maintained pressure of just 0.008 bar (80mm head), making it well suited to low-pressure systems. The maximum maintained pressure is 0.5 bar (5 metre head), with a maximum static pressure of 1.0 bar (10 metre head).\n\n\u003ch3\u003ePowerful Shower Performance\u003c\/h3\u003e\n\nThe Mira Event XS can provide a flow rate of up to 14 litres per minute, helping create a revitalising and enjoyable shower. Its 11cm four-spray showerhead gives you a choice of spray patterns, while the rub-clean nozzles make it easy to remove limescale and keep the showerhead clean.\n\nThe shower also offers temperature stability of +6°C, helping maintain a comfortable showering temperature during use.\n\n\u003ch3\u003eSimple Installation and Maintenance\u003c\/h3\u003e\n\nThe Mira Event XS has been designed to make installation and ongoing maintenance as straightforward as possible. There is no need to prime the unit, while removable filters and check valves make servicing and cleaning easier.\n\nWater and cable entry points are positioned on the left and can be configured for rising, falling or rear entry. The unit uses a 15mm dual-entry push-fit inlet connection and 1\/2\" BSP male outlet connections. It operates on a 230V supply with a ±10% tolerance and has a 3 amp supply rating. The terminal block accepts connections up to 2.5mm².\n\n\u003ch3\u003eWater Supply Requirements\u003c\/h3\u003e\n\nFor reliable operation, the Mira Event XS requires a minimum cistern capacity of 230 litres. It is suitable for systems providing the required hot and cold water supply conditions, with the low minimum maintained pressure making it particularly suitable for low-pressure installations.\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cul\u003e \u003cli\u003ePowerful flow for a revitalising shower experience\u003c\/li\u003e \u003cli\u003eSuitable for low-pressure water systems\u003c\/li\u003e \u003cli\u003eAvailable in white or white\/chrome finishes\u003c\/li\u003e \u003cli\u003eManual control system\u003c\/li\u003e \u003cli\u003eSeparate temperature and flow controls\u003c\/li\u003e \u003cli\u003eUp to 14 litres per minute flow rate\u003c\/li\u003e \u003cli\u003eLarge 11cm four-spray showerhead\u003c\/li\u003e \u003cli\u003eRub-clean showerhead nozzles for easy cleaning\u003c\/li\u003e \u003cli\u003eFactory-set safe maximum temperature\u003c\/li\u003e \u003cli\u003eMaximum temperature stop for enhanced safety\u003c\/li\u003e \u003cli\u003eAutomatic shutdown\u003c\/li\u003e \u003cli\u003eNo need to prime during installation\u003c\/li\u003e \u003cli\u003eRemovable filters and check valves for easier maintenance\u003c\/li\u003e \u003cli\u003e15mm dual-entry push-fit inlet connection\u003c\/li\u003e \u003cli\u003e1\/2\" BSP male outlet connections\u003c\/li\u003e \u003cli\u003eMinimum maintained pressure: 0.008 bar (80mm head)\u003c\/li\u003e \u003cli\u003eMaximum maintained pressure: 0.5 bar (5 metre head)\u003c\/li\u003e \u003cli\u003eMaximum static pressure: 1.0 bar (10 metre head)\u003c\/li\u003e \u003cli\u003eMinimum cistern capacity: 230 litres\u003c\/li\u003e \u003cli\u003e230V supply with ±10% tolerance\u003c\/li\u003e \u003cli\u003e3 amp supply rating\u003c\/li\u003e \u003cli\u003eTerminal block suitable for cables up to 2.5mm²\u003c\/li\u003e \u003c\/ul\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003ch4\u003eIs the Mira Event XS suitable for low water pressure?\u003c\/h4\u003e\n\nYes. The Mira Event XS is designed specifically to work with low-pressure water systems and requires a minimum maintained pressure of only 0.008 bar (80mm head). It also provides a flow rate of up to 14 litres per minute for a powerful shower experience.\n\n\u003ch4\u003eDoes the Mira Event XS allow separate temperature and flow adjustment?\u003c\/h4\u003e\n\nYes. The shower has separate manual controls for temperature and water flow, allowing you to adjust both independently to achieve your preferred showering experience.\n\n\u003ch4\u003eIs the Mira Event XS easy to clean and maintain?\u003c\/h4\u003e\n\nYes. The shower is designed for straightforward maintenance, with removable filters and check valves. The four-spray showerhead also features rub-clean nozzles, making it easier to remove limescale and maintain good spray performance.","brand":"Mira","offers":[{"title":"Default Title","offer_id":55209867346262,"sku":"181359","price":362.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0905\/4509\/4998\/files\/mira-event-xs-manual-fittings-whitechrome-power-shower-2071160.jpg?v=1789030452","url":"https:\/\/jjbuildingmaterials.co.uk\/products\/mira-event-xs-manual-fittings-white-chrome-power-shower","provider":"JJ Building Materials","version":"1.0","type":"link"}